Getting started
Setup & care
Install HoneySleep in about 5 minutes, then keep each component clean and ready.
- About 5 minutes
- Typical setup
- No tools
- Fits like a sheet
- No app
- Connects automatically
Set up in three steps
- 1
Fit the cover
Pull it over your Queen or King mattress like a fitted sheet.
- 2
Connect the hub
Attach the cover cable, then plug the hub into a standard wall outlet.
- 3
Place the companion
Set it on your nightstand. It connects to the hub automatically.
Compatibility
- US Queen: 60 x 80 inches
- US King: 76 x 80 inches
- Mattress depth: 8 to 16 inches
- Works with most adjustable bases
For a split-king setup, email support and we will help with the right configuration.
Clean the cover
- 1
Detach the electronics
The module unclips in under ten seconds.
- 2
Wash cold
Use mild detergent. Do not bleach, iron, or dry clean.
- 3
Tumble dry low
Wipe the hub and companion with a dry microfiber cloth only.
Store the system
For storage longer than one month, detach the electronics, fold the cover loosely, and keep it in a cool, dry place. The hub may remain plugged in; it draws less than 2 watts at idle.